Can I run Poolcore: Submersion on an Intel Arc B580?
Yes, it runs194 FPS 1080p High
With an Intel Arc B580, Poolcore: Submersion runs at about 194 FPS at 1080p High. See the FPS for every resolution and quality level below.
Poolcore: Submersion: FPS on an Intel Arc B580
Estimated with a Ryzen 5 7600 and 16 GB RAM, native resolution (no upscaling).
Not yet checked against benchmarks, a rough estimate that can be off by 25 % or more.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 349 | 262 | 194 | 151 |
| 1440p | 258 | 194 | 143 | 112 |
| 4K | 157 | 118 | 87 | 68 |
Best-looking setting for 60 FPS at 1080p: Ultra (native), ~151 FPS
Poolcore: Submersion system requirements
| Minimum | Recommended | |
|---|---|---|
| OS | Windows 10/11 | Windows 10/11 |
| Processor | Intel Core i5 | Intel Core i5 |
| Graphics | Nvidia GTX 1080 | Nvidia GTX 3080 |
| Memory | 8 GB RAM | 8 GB RAM |
| Storage | 8 GB available space | 8 GB available space |
Will it run on my PC?
This page assumes a Intel Arc B580. For your real hardware, check your whole Steam library at once:
Poolcore: Submersion on other graphics cards
Frequently asked questions
- Can I run Poolcore: Submersion on an Intel Arc B580?
- Yes. Poolcore: Submersion runs at about 194 FPS at 1080p High on an Intel Arc B580.
- How many FPS does Poolcore: Submersion get on an Intel Arc B580?
- About 194 FPS at 1080p on High, at native resolution. The full table for every resolution and quality level is above.
