Can I run NeonCode on an Intel Arc B580?
Yes, it runs193 FPS 1080p High
With an Intel Arc B580, NeonCode runs at about 193 FPS at 1080p High. See the FPS for every resolution and quality level below.
NeonCode: FPS on an Intel Arc B580
Estimated with a Ryzen 5 7600 and 16 GB RAM, native resolution (no upscaling).
Not yet checked against benchmarks, a rough estimate that can be off by 25 % or more.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 193 | 193 | 193 | 193 |
| 1440p | 193 | 193 | 193 | 193 |
| 4K | 193 | 193 | 171 | 134 |
Best-looking setting for 60 FPS at 1080p: Ultra (native), ~193 FPS
NeonCode system requirements
| Minimum | Recommended | |
|---|---|---|
| OS | Windows 10 | Windows 10 |
| Processor | AMD A8-5600 or similar i5 | Intel i5 8400 or similar |
| Graphics | Nvidia GeForce GT710 or similar (2Gb VRAM) | 3Gb VRAM (AMD or Nvidia) |
| Memory | 8 GB RAM | 12 GB RAM |
| Storage | 5 GB available space | 5 GB available space |
Will it run on my PC?
This page assumes a Intel Arc B580. For your real hardware, check your whole Steam library at once:
NeonCode on other graphics cards
Frequently asked questions
- Can I run NeonCode on an Intel Arc B580?
- Yes. NeonCode runs at about 193 FPS at 1080p High on an Intel Arc B580.
- How many FPS does NeonCode get on an Intel Arc B580?
- About 193 FPS at 1080p on High, at native resolution. The full table for every resolution and quality level is above.
