Can I run Domain-Controller on an Intel Arc B580?
Yes, it runs168 FPS 1080p High
With an Intel Arc B580, Domain-Controller runs at about 168 FPS at 1080p High. See the FPS for every resolution and quality level below.
Domain-Controller: FPS on an Intel Arc B580
Estimated with a Ryzen 5 7600 and 16 GB RAM, native resolution (no upscaling).
Not yet checked against benchmarks, a rough estimate that can be off by 25 % or more.
| Resolution | Low | Medium | High | Ultra |
|---|---|---|---|---|
| 1080p | 168 | 168 | 168 | 168 |
| 1440p | 168 | 168 | 168 | 168 |
| 5120×1440 | 168 | 168 | 168 | 150 |
| 4K | 168 | 168 | 168 | 138 |
Best-looking setting for 60 FPS at 1080p: Ultra (native), ~168 FPS
Domain-Controller system requirements
| Minimum | Recommended | |
|---|---|---|
| OS | Windows 10 64-bit (version 21H1 or later) | Windows 10/11 64-bit |
| Processor | Intel Core i5 8th gen or AMD Ryzen 3, 4 cores | Intel Core i5 10th gen or AMD Ryzen 5 |
| Graphics | DirectX 11 GPU, Intel UHD 620 or better | NVIDIA GTX 1050 / AMD RX 560, 2 GB |
| Memory | 8 GB RAM | 16 GB RAM |
| Storage | 1 GB available space | 1 GB available space |
Will it run on my PC?
This page assumes a Intel Arc B580. For your real hardware, check your whole Steam library at once:
Domain-Controller on other graphics cards
Frequently asked questions
- Can I run Domain-Controller on an Intel Arc B580?
- Yes. Domain-Controller runs at about 168 FPS at 1080p High on an Intel Arc B580.
- How many FPS does Domain-Controller get on an Intel Arc B580?
- About 168 FPS at 1080p on High, at native resolution. The full table for every resolution and quality level is above.
